Knowledge of laying wooden flooring makes your home more than ten times comfortable!

Nowadays, many households choose Wooden Flooring when carrying out indoor decoration on the ground. Due to the convenience and cleanliness of wooden flooring cleaning, there are many ways to lay wooden flooring. Before laying, we need to choose a good method so that we can lay it according to the steps. However, during the entire process of laying, we should not be too hasty and design a plan according to our own indoor decoration style.

How to lay wooden flooring? How to shop with care!

This type of laying method is to immediately stick the floor to the floor, so during laying, the ground must be kept dry and flat. It is best to use excessively long wooden boards when laying, otherwise it is very easy to cause warping. It is best to select solid wooden boards or cork floors with a length of less than 30 centimeters for laying, and these small pieces of red teak or floor tile patterned floors can be immediately laid. Available types: floor tile parquet, cork flooring, and composite wood flooring. Advantages and disadvantages: Easy installation and operation, exquisite appearance, but high requirements for engineering construction, making it very easy to have warped edges.

Wood flooring with keel laying method
Cladding refers to fixing these strip shaped wooden materials on the floor as the load-bearing capacity of the floor, and maintaining a certain spacing between each keel before laying a wooden floor on top. At present, there are many types of keels, including wooden, plastic, aluminum alloy profiles, etc. Available types: solid wood board, composite solid wood flooring. Advantages and disadvantages: The wooden floor laid with keel does not require drilling and nailing, and is relatively sturdy, but it may cause harm to the building structure.

Wooden floor lifting paving method
The method of laying a raised and lowered wooden floor does not mean that the floor is immediately laid on the ground, but that the floor is first laid with felt, and then the wooden floors with locks or slots are laid together. Suitable types: composite solid wood flooring, reinforced flooring. Advantages and disadvantages: Easy to lay, less prone to arching and deformation, more convenient to disassemble and replace, but very prone to moisture regain.

Wood Floor keel method
The laying method of this type of floor is to first lay the keel on the ground, then lay a layer of rough floor on the top of the keel, so that the rough floor and the keel are fixed together, and then lay the floor on the top of the rough floor. Not only does it have excellent waterproof effect, but it is also very comfortable to use. Suitable types: solid wood flooring, composite solid wood flooring, and cork flooring. Advantages and disadvantages: Excellent waterproof performance, but relatively high cost.

Common problems with laying wooden flooring
The first type
Pay attention to the moisture content of the keel when laying wooden flooring. The moisture content of untreated wooden keel is too high, which can easily cause the wooden floor to arch and the car paint to crack. The keel should be made of dry and straight wood with a specification and model of 3 × 50px or 4 × 62.5px is recommended, ensuring that the keel is level before fixing it to the ground with nails.

Second type
Pay attention to the flatness of the floor when laying wooden flooring. Ensure that the ground is dry, level, and free of dirt. Generally, the installation of the floor should be carried out after other building decorations are carried out. The uneven ground will cause a portion of the floor and keel to hang in the air, and a sound will immediately be heard when stepping on it. Pay attention to the length direction of the floor. During construction, it is important to ensure that the length direction of the floor is consistent with the direction of the entrance to ensure a good sense of space.

Third type
Pay attention to the method of fixing the wooden floor when laying it. The fixed method of using wooden wedges and nails on the construction site can lead to insufficient grip due to the small surface of the wooden wedges and nails, which can easily cause the wooden keel to loosen and cause a sound when pressing on the floor.