Wood floor

First, what is wood floor? Wood floor refers to the floor made of wood, the common wood floor mainly has solid wood floor, solid wood composite floor, reinforced composite floor and so on. Second, the classification of floor materials Solid wood floor Solid wood flooring is made of natural wood directly after cutting and processing products, retaining the pattern and texture of natural wood. Advantages: 1. Sound insulation Because the solid wood floor material is hard, the wood fiber structure is rigorous, and the thermal conductivity is low, the effect of blocking sound and hot air will be better. 2. Warm in winter and cool in summer, feet feel comfortable The wood floor can automatically adjust the temperature and humidity of the room by absorbing and releasing water, and adjust the air humidity of the room to the level of human comfort. And because of its small thermal conductivity, it has the effect of warm in winter and cool in summer, and the thermal insulation effect is also very good. No matter at any time of the year, stepping on the wooden floor will not have a cold feeling, and the feet feel comfortable. 3. No formaldehyde, green and harmless Solid wood floor materials from natural wood, the use of non-volatile wear-resistant paint coating, from the material to the paint are green and harmless, there will be no formaldehyde, is an environmentally friendly ground building materials. 4. Beautiful and natural texture Solid wood flooring texture natural, texture often give people a return to nature, back to the original feeling, regardless of the texture and beauty are unique, the visual effect is very good. Cons: The cost of wood is high and the price is relatively expensive Laying needs to hit the keel, the process is relatively cumbersome. After the pavement needs to be adjusted twice, the later maintenance cost is high, improper maintenance will also open the arch, and even the cracking stability is poor. Considering the natural wood "dry shrinkage and wet expansion", there may be a phenomenon of warping deformation, if you want to use geothermal heat, with a lock will be slightly better. Solid wood laminate flooring It refers to the solid wood veneer as the surface layer, the middle is composed of multiple layers of solid wood veneer crisscross, to a certain extent to overcome the shortcomings of solid wood floor wet rise and dry contraction, dry contraction wet expansion rate is small, with good dimensional stability, the bottom is also solid wood veneer floor, still has natural wood grain and foot feeling comfortable. Advantages: 1, natural wood feeling, good touch, good wear resistance, do not need to spend too much energy maintenance, easy to clean. 2, because the solid wood composite floor substrate is made of multi-layer veneer composite, wood fibers crisscrossed into a network of laminated combination, so that the various internal stresses of wood adapt to each other between the laminates, the strongest stability, plus not easy to deformation and damage, but also able to withstand heat. 3, simple installation, cost-effective. Composite floor installation is simpler than pure solid wood flooring, and the installation cost will be relatively low. Cons: 1, most of the solid wood composite floor will use formaldehyde pulse aldehyde glue is slightly less environmentally friendly, will affect health. 2, some of the relatively low-end solid wood composite floor surface veneer is thinner, so it is not durable enough, the service life will be relatively short, once the decorative layer is damaged, it can not be restored. picture Laminate flooring Laminate flooring is generally composed of four layers of material composite, namely wear-resistant layer, decorative layer, high-density substrate layer, balance (moisture-proof) layer. The surface is super wear-resistant, strong hardness, and the material is aluminum oxide (also useful for melamine, but not up to environmental standards, directly). Under the wear-resistant layer is the wood grain layer, which is printed with wood grain or other patterns of imitation precious tree species, so the laminate wood floor pattern is very rich and the choice is very large! The decorative layer is artificial, just like stickers, can simulate a variety of floor colors, will have a certain repeatability, and the texture is not so good, the foot is hard, and the comfort is not good. Qualified laminate flooring is one or more layers of special impregnated thermosetting amino resin. It is covered on the surface of substrate such as high-density board, and is made by hot pressing with balanced moisture-proof layer on the back, decorative layer and wear-resistant layer on the front. Advantages: 1, wear resistance and scratch resistance, is the most wear-resistant of all floors. 2, moisture resistant, the most convenient cleaning 3, the appearance level is high, the style is rich and diverse, there are many styles to choose from 4, the price is cheap, is the cheapest of all flooring Cons: 1, the foot feeling is general, the comfort is poor, not as good as solid wood flooring 2, not environmentally friendly. Although the laminate flooring of well-known domestic brands can meet the national E1 level environmental standards, the environmental performance is weak compared with the current solid wood and multi-layer flooring without aldehyde. 3. It is not suitable for paving with floor heating picture Third, how to choose high-quality wood flooring? 1. Pay attention to color Quality wood flooring tone natural, clear texture, if the floor surface dark, dull, pattern texture fuzzy effect is poor, it is shoddy products. If the floor surface color is heavy and the paint layer is thick, it may be caused by the floor surface defects. 2, the choice of size The specifications and dimensions mentioned here refer to the length, width and thickness of the floor. The wide and long board will indeed bring more atmospheric visual emotion, but in general, the greater the length and width of the floor, the greater the corresponding deformation, so we must consider the technical requirements to ensure that the deformation of the wide and long board does not affect the use of. In general, the smaller the floor size, the stronger the resistance to deformation. Although the wide plate is more beautiful, the texture is relaxed, and the pattern is complete, the qualified wide plate must go through strict material selection and quality acceptance. 3, the number of wood floor paint layers The more the wood floor paint layer, the more wear-resistant the argument is not necessarily the more the paint layer does promote a certain wear-resistant function, but too much paint layer will reduce the permeability of the paint layer, the wood grain luster and clarity are weakened, the characteristics of valuable wood species are often buried by the paint layer, and some defective boards are also covered; At the same time, too many paint layers make the adhesion and flexibility of the paint layer greatly reduced, and it is easier to cause the paint layer to crack or even collapse. 4, look at the processing accuracy You can place several floors on the level with your hand, carefully see its processing quality accuracy, finish, whether it is smooth, smooth, and whether the installation gap is tightly stitched. The quality of the floor should be precision workmanship, accurate size, flat corners, no height and drop. 5. Look at the type of wood flooring Before purchasing wood flooring, the most important thing is to understand the different types of wood flooring. Common wood flooring materials include hardwood flooring, laminate flooring and laminate flooring. Solid wood flooring is made of natural wood, good texture but high price; Composite flooring is composed of multi-layer materials, which has a high cost performance; Laminate flooring is made of high density fiberboard, waterproof, suitable for kitchen and bathroom use. 6. Look for a wear-resistant layer With ordinary woodworking sandpaper, dozens of hard friction on the front of the floor, if it is a fake laminate wood floor will be ground white, and the standard laminate floor will not change.

26 April-2024

How to choose solid wood laminate floor?

In home decoration, more and more consumers will consider choosing solid wood composite flooring when purchasing wood flooring, which has both the wood foot sense of solid wood flooring and the wear resistance of reinforced composite flooring. But in the face of a dazzling array of solid wood composite flooring products, how should we choose? Look at the structure Hey, hey, hey, hey, hey Solid wood composite flooring is usually divided into three layers of solid wood composite flooring and multi-layer solid wood composite flooring according to the structure. The three-layer solid wood composite floor is composed of solid wood panel or single board, solid wood panel as the core layer, and single board as the bottom three-layer structure. Multilayer solid wood composite floor is made of solid wood panel or single board and plywood as the base material. Obviously, the three-layer solid wood composite floor uses more logs, so its price will be more expensive than the multi-layer solid wood composite floor. Hey, hey, hey, hey, hey Read the sign Hey, hey, hey, hey, hey The "teak", "oak", "black walnut", "hedgehog rosewood", etc., in the name or model of the solid wood composite floor does not mean that the solid wood composite floor is mainly made of this wood, but refers to the surface layer of wood. For example, the oak solid wood composite floor written on the product label, the specification is 910 mm×127 mm×15mm/2.0mm, the first three numbers indicate the length, width and thickness of the floor, and the last "2.0mm" indicates the thickness of the oak surface layer. Multi-layer solid wood composite floor surface thickness is generally 0.6mm, 1.2mm and 2.0mm and other specifications, 2.0mm above the general price is more expensive, 0.6mm and 1.2mm cost-effective, more suitable for ordinary consumer home positioning. The surface thickness of three layers of solid wood composite is 3mm-5mm. Hey, hey, hey, hey, hey Depend on the grade Hey, hey, hey, hey, hey In addition to paying attention to the thickness of the surface layer of wood, consumers also need to pay attention to the release level of formaldehyde. The latest national standard divides the formaldehyde emission of wood-based panels and their products into three levels, namely: e1≤0.124mg/m3, e0≤0.050mg/m3, enf≤0.025mg/m3. It is recommended that consumers give priority to solid wood composite flooring with low formaldehyde release. Hey, hey, hey, hey, hey " Pay attention to purchasing Consumers who have pets at home, due to the sharp claws of pets, it is recommended to buy thicker surface layer, wear resistance will be better. Need to use geothermal, because geothermal wood floor performance and formaldehyde release requirements are more stringent, it is recommended to buy after special process treatment can be used for geothermal solid wood composite flooring. The floor will be lost during the installation process, the room type is more regular, the loss is relatively less, and it is generally recommended that consumers buy more than 5% of the floor area.

25 April-2024

What are the advantages and disadvantages of engineering flooring? And how to buy correctly?

Engineering floor commonly known as "diamond board", the scientific name "impregnated paper laminated wood floor", composed of four layers of material composite, relatively wear-resistant, has a strong decorative, but also moisture-proof. One: Engineering floor advantages 1, because the engineering floor is often used for large sites, compared with solid wood, its specifications and sizes are relatively large. 2, its artificial pattern is very rich, the color is also very uniform, laying the visual effect is very good. 3, the reason why the engineering floor is applied to the engineering level, since it has a tough appearance, the wear resistance can reach more than 4000 revolutions, which is far more than the national standard, while the normal solid wood wear standard is only about 300 revolutions. 4, it also has flame retardant, anti-pollution, anti-corrosion, anti-impact, anti-pressure and other high performance characteristics. 5, the engineering floor is very stable, not easy to arch, small gap, simple and convenient laying. 6, do not need special care, daily cleaning can, and the price is very affordable. Two: Engineering floor shortcomings 1, the engineering floor due to the high density, so the landing feeling is not comfortable and natural. 2, due to the special strengthening process of the engineering floor, its repairability is very poor, the general damage must be replaced, can not be repaired twice. 3, the engineering floor is made of enhanced processing technology, adhesives will be used in the production process, so a certain amount of formaldehyde will be produced, which will affect people's health. Therefore, it is still recommended to use E0 grade laminate flooring for home decoration, and E0 laminate flooring designed for families by Zhenrui Flooring makes formaldehyde no longer exist. Three: the correct purchase of engineering floor 1, look at the quality: the engineering floor should be based on high-density fiberboard as the substrate, the national standard thickness of 8mm, below this thickness is easy to appear quality problems. 2, look at the amount of formaldehyde release: the standard of green building materials stipulated by international environmental protection organizations is not higher than 9mg/100g, higher than this value we do not consider. 3, look at the brand: some well-known brands, will ensure the quality of products and after-sales service. Rongzhida has more than 60 years of brand history, is the people's heart deserved the light of domestic goods, choose Zhenrui floor can be assured of use. 4, look at moisture-proof measures: although the moisture resistance of the engineering floor is very good, it will also be equipped with a special moisture-proof mat, and the floor will also be coated with a thick moisture-proof layer. Zhenrui floor not only provides you with a special waterproof mat set for the engineering floor, but also provides kickers for recent activities. 5, look at the price: As the saying goes, "one penny, one cent goods", but the purchase of Rongzhida engineering floor, you can use the second-line price, buy the first-line products, because Zhenrui floor has its own production line, mass production and sale, the price is more beautiful. 6, look at the after-sales: because the life span of the floor is very large, the market can do long-term after-sales service is not much, usually the first two years can also be contacted, after a few years even the brand can not find. On the contrary, the red carpet service has been with the brand for decades, and is 7*24 hours a year service, if you can contact any questions. In fact, the engineering floor is the laminate floor we often hear, and the laminate floor to use formaldehyde adhesives, so we understand the advantages and disadvantages of laminate floor, but also know how to correctly buy.

24 April-2024

The difference between solid wood flooring and solid wood laminate flooring

In the decoration process, the choice of the floor is a very important task. There are two main types of flooring on the market: solid wood flooring and solid wood laminate flooring. The two types of flooring look similar, but there are actually big differences. As a small white who has no experience in decoration, I finally understood the difference between solid wood flooring and solid wood composite flooring after laying a wooden floor. This article will detail the differences between the two types of flooring to help you understand them better. Solid wood floor Hardwood floors are sawn from a single species of tree in one piece, retaining the texture and feel of natural wood. Its advantages are environmental protection, natural, beautiful, and can add a warm atmosphere to the home environment. The disadvantage of solid wood flooring is that it is expensive, requires regular maintenance and maintenance, is susceptible to the impact of environmental humidity, and is prone to arch, warping and other phenomena. picture In the market, common solid wood floors are oak, walnut, pine and so on. Among them, the texture of oak floor is beautiful, strong wear resistance, is the mainstream product on the market. The price of pine flooring is relatively low, suitable for families with limited budgets. Solid wood laminate flooring Solid wood flooring is made of multiple layers of wood bonded together, usually by the surface, substrate and bottom composition. Its advantage is that its price is relatively low, its stability is good, and it is not easy to be damp, deformed or cracked. The disadvantage of solid wood composite flooring is that its appearance and touch are different from that of solid wood flooring, and chemical substances such as viscose need to be used in the production process, and there are certain environmental problems. picture In the market, the common solid wood composite flooring are reinforced composite flooring, multi-layer solid wood composite flooring and so on. Among them, the reinforced composite floor surface is hard and wear-resistant, suitable for families with children and pets; Multi-layer solid wood composite floor has better natural wood texture and touch, suitable for the pursuit of natural sense of the family. After laying wood flooring once, I deeply realized the difference between solid wood flooring and solid wood composite flooring. When choosing a floor, you need to consider it according to your own needs and budget. If you pursue environmental protection, nature and beauty, and the budget is sufficient, solid wood flooring is a good choice; If you pay more attention to stability and price, and the environmental requirements are not high, solid wood composite flooring is more suitable. picture In addition to the differences mentioned above, there are also differences in the installation and maintenance of solid wood flooring and solid wood laminate flooring. Solid wood flooring needs to lay a keel or mat, the installation is more complicated; The solid wood composite floor can be laid directly on the flat ground, and the installation is relatively simple. In terms of daily maintenance, solid wood flooring requires regular waxing and maintenance, while solid wood laminate flooring requires regular cleaning and prevention of scratched surfaces. In summary, solid wood flooring and solid wood composite flooring have advantages and disadvantages, the choice of which flooring needs to be considered according to their actual situation. When buying flooring, it is recommended to choose well-known brands and reliable quality products to ensure the quality of decoration and home safety. At the same time, it is also necessary to pay attention to details in installation and maintenance, and follow the advice and guidance of professionals to extend the service life of the floor and maintain the aesthetic effect. Finally, remind everyone to pay attention to one point: when buying and installing flooring, be sure to pay attention to environmental protection issues. Try to choose formaldehyde-free or low formaldehyde floor materials to reduce pollution to the indoor environment. Let's work together to create a healthy, comfortable and beautiful home environment!

23 April-2024

Underfloor heating and wooden floors

1, whether it is a cold winter or a hot summer, three layers of solid wood flooring have the effect of humidity. The most comfortable humidity of the human body in the atmosphere is between 60% and 70%, and the wood floor can maintain the humidity within the comfort range of the human body through its own characteristics. 2, three layers of solid wood flooring beautiful and natural, comfortable feet. The wooden floor has a natural wood grain painted into a beautiful picture scroll to give people a return to nature, back to the original vision, and the feet feel comfortable. And stone, tile, cement always give a person's vision is hard, cold feeling. 3. The structure of the three-layer solid wood floor of the Holy image has longitudinal heat conduction lock and super heat transfer ability. There are layers of three-dimensional structure, the unique strip core material is Nordic pine, their material is loose, its thermal resistance coefficient is less than other types of wood flooring. At the same time, the expansion gap is reserved for the air convection between the layers to reserve enough space, forming a virtuous cycle of thermal conductivity lock, to achieve good thermal conductivity of the floor; At the same time, different kinds of wood are used between the layers and overlapping pressing, so that the wood is involved with each other, effectively overcoming the tension of the wood itself, and ensuring the stability of the solid wood floor. This structure greatly reduces the possibility of arch and cracking of the solid wood floor, ensuring the reliability and life of the use. Unique patented locking technology, to ensure that the floor joint of the seamless and super deformation resistance, so that the floor is not easy to crack in the joint under geothermal conditions, installation only two floors above and below the joint, you can accurately buckle, real close seam, to avoid dust accumulation and bacterial growth. 4, in the ground heating environment, three layers of solid wood flooring can be renovated. Floor heating paving process The first step: Clean the ground: pay attention to clean the corner flat, ensure that enough expansion joints. Step 2: Lay a layer of plastic sheet on the ground to isolate moisture, so that the plastic sheet is 10cm higher than the ground at the four corners. Step 3: Laying the floor mat: pay attention not to overlap, the interface must be sealed with tape, and around the wall 5cm. Step 4: Pave the floor. 1. When installing the floor, the moisture content of the cement floor should not exceed 10%; 2, before laying the floor, the heating system should be turned on for at least two weeks, and it is 2/3 of the maximum heat output, so that all remaining moisture evaporates out; 3, three to four days before the floor installation, the heating system is reduced to the appropriate installation temperature (about 20±2 degrees in the room); 4, geothermal system heating must be uniform temperature, avoid some surface temperature is too high, try to keep the surface constant temperature, 5, the room surface need to have geothermal heating, and must use standard functional components, the floor heating ground temperature is not allowed to exceed 27 ° C. 6, the heating system meets the basic heating conditions: closed, insulated and other geothermal heating system on the ground, it is strictly prohibited to pick nails on the ground, holes and other measures. Step 5: Accessories: To use a thicker baseboard than the ordinary floor, and need to be independently constructed. Step 6: Geothermal test: The floor can only be heated 24 hours after installation. How to properly enjoy the floor heating 1, the first use of the geothermal system every year, to gradually warm up, with a daily increase of not more than 3℃-5℃ is appropriate. Geothermal system in the winter heating floor surface temperature is not allowed to exceed 27 degrees, otherwise high temperature baking will accelerate the loss of water in the floor, easy to lead to cracking of the floor. 2, the floor heating floor is also very afraid of drying. As the weather gets colder and colder, the flow of dry outdoor air into the room will increase the dryness and accelerate the deformation of the floor. At this time, it is necessary to increase the relative humidity of the room, place a humidifier in the room, or use a semi-dry mop to mop the floor every day to moisturize. The indoor relative humidity reaches 40% to 60%, which can effectively avoid the cracking of the floor table. 3, winter heating season did not stay, it is recommended to turn off or turn down the heating, at least once a week to open the window ventilation and semi-dry mop mop the floor care. 4, under the heating environment, avoid the use of furniture, carpet and floor directly cover a large area, will make the floor here due to the heat can not be dispersed, too concentrated and lead to uneven heating of the floor, resulting in deformation of the floor here, waste of heat. The sharing of the floor heating and the floor is here, Xiaoxiang students friendly tips: because you buy solid wood flooring, please be sure to respect the natural properties of wood, please believe that the floor is the continuation of tree life, it needs timely ventilation, reasonable lighting and suitable environment! In daily use, please use and care for it reasonably to ensure the beautiful appearance and excellent performance of the floor.

22 April-2024