Humidity control
In winter, when the indoor humidity is less than 50%, it is advisable to use a humidifier or wet mop to mop the floor. If the indoor humidity is greater than or equal to 70%, ventilate or use a dehumidifier or air conditioner to dehumidify the room.
Tips: The Solid Wood Floor heating floor and the human body are actually very similar, the humidity is too high or too low will affect it!
The experiment shows that
1) When the relative humidity is 50%-60%, the human body feels the most comfortable and is not easy to cause disease. The most suitable relative humidity for solid Wood Floor heating is also 50%-60%;
2) When the humidity is too large, people will feel listless, but also prone to rheumatism, rheumatoid arthritis and other wet arthralgia, solid wood heating floor may also be due to excessive water absorption, expansion and arch problems;
3) When the humidity is too low, the evaporation is accelerated, and the dry air is easy to take away the moisture of the human body and the solid wood floor heating floor, making the skin dry and cracked, and the symptoms of thirst, dry cough, hoarseness, sore throat and so on; Make solid wood floor heating water dry shrinkage, serious if there will be a problem from the seam.
therefore
In order to make our life more healthy and comfortable, the relative humidity must be controlled within the corresponding interval.
Temperature control
Heating system used for the first time
When the heating system is used for the first time, it should not be heated too fast, and it should be heated slowly. The recommended starting temperature is 15 ° C (ground temperature), the heating rate is 1 ° C /h, the maximum temperature of the electric heating ground cannot exceed 38 ° C, the maximum allowable temperature change within 24 hours is 5 ° C, and the floor surface temperature cannot exceed 27 ° C.
Later use heating system
The use of solid wood floor heating environment, no matter what kind of heat source (electric heat, electric heat film, water heating), the surface temperature should be less than 42 ° C (that is, the temperature directly in contact with the interface on the back of the floor), it is best to control at about 38 ° C, and the floor surface temperature is controlled between 25 ° C and 28 ° C.
It is not difficult to find that almost all families using the floor will be very concerned about the maintenance of the floor, and the maintenance of the floor in addition to the control of temperature and humidity, should also be used correctly and scientifically.
1) Prevent long-term exposure to sunlight after paving the floor;
2) Avoid metal sharps, glass, porcelain pieces, shoe nails and other hard debris scratch the floor, do not drag furniture and heavy objects on the floor surface;
3) It is forbidden to contact the floor with open fire or place high-power electric heaters directly on the floor, and it is forbidden to place strong acidic substances on the floor;
4) When the floor heating is used, the surface temperature of the floor shall not exceed 27 ° C, and the non-breathable material covering an area of more than 1.5㎡ shall not be covered. Furniture without leg and foot protection measures shall be avoided.
5) If the room with solid wood floor heating is not used for a long time, it should be regularly ventilated, dehumidified or humidified;
6) Excellent quality solid wood floor heating, no need to use wood oil essence or floor wax maintenance, to avoid the excessive use of wood oil essence into the floor mortising groove caused by floor noise and caused the floor surface slip caused by the elderly and children walking down, just after the vacuum cleaner dust, use wring out semi-wet mop or wipe treatment, and do a good job of ventilation and drying.
