Solid wood floor maintenance skills

Solid wood flooring is like a gift from heaven, and its unique texture and texture give people a feeling of returning to the outdoors and returning to simplicity. Solid wood flooring with beautiful natural, environmental health, excellent decorative effect and other advantages, has become the preferred ground decoration material in modern families. Laying solid wood flooring is not once and for all, but also need to maintain solid wood flooring, today we will take a look at the maintenance skills of solid wood flooring.

picture

1. Scrub clean

In daily cleaning, you can wipe with a vacuum cleaner or a wringing cotton mop, remember not to use caustic water, soapy water and other corrosive liquid scrubbing, so as not to damage the paint film. Then use a soft cloth dipped in a special cleaning agent to clean, for large areas of cleaning, you can use a special sprayer.

2. Waterproof, heat release

If the heating leaks and there is water on the floor, it must be cleaned with a dry soft cloth in time. After cleaning, it can not be directly exposed to the sun or baked with an electric oven, so as to avoid drying too fast and cracking the floor. Animal urine is acidic and alkaline and should be cleaned up when needed. Good floor such as long-term do not live, do not use plastic sheet or newspaper cover. Over time, the film will become sticky and lose its luster. At the same time, do not contact the floor directly with objects with very high temperature.

3. Dirt proof

Waxing every once in a while, the time interval depends on the finish of the floor paint, preferably every three months, before waxing, you should first dust off the scale, wipe the floor with a wring out rag and wax, starting from one edge of the Wood Floor, in turn, do a ring wipe on the board, to be evenly wiped again, and then use the original rag (no longer dipped in wax) from the edge of the original wipe, According to the above scheme, the waxed floor surface is not only clean and shiny, but also can protect the paint film and delay the aging of the floor.

Step 4 Apply paint

After three or five years of use, the same paint used to paint the floor can be used to paint the floor again. In addition to removing dust and scaling before painting, use a fine water abrasive paper, dipped in warm water, and gently polish the board surface to remove the residual oil and small particles on the floor. After polishing, wipe it with a clean rag, and then paint it. In this way, the floor will be smoother, cleaner and brighter.