1, whether it is a cold winter or a hot summer, three layers of solid wood flooring have the effect of humidity. The most comfortable humidity of the human body in the atmosphere is between 60% and 70%, and the Wood Floor can maintain the humidity within the comfort range of the human body through its own characteristics.
2, three layers of solid wood flooring beautiful and natural, comfortable feet.
The wooden floor has a natural wood grain painted into a beautiful picture scroll to give people a return to nature, back to the original vision, and the feet feel comfortable. And stone, tile, cement always give a person's vision is hard, cold feeling.
3. The structure of the three-layer Solid Wood Floor of the Holy image has longitudinal heat conduction lock and super heat transfer ability.
There are layers of three-dimensional structure, the unique strip core material is Nordic pine, their material is loose, its thermal resistance coefficient is less than other types of wood flooring. At the same time, the expansion gap is reserved for the air convection between the layers to reserve enough space, forming a virtuous cycle of thermal conductivity lock, to achieve good thermal conductivity of the floor; At the same time, different kinds of wood are used between the layers and overlapping pressing, so that the wood is involved with each other, effectively overcoming the tension of the wood itself, and ensuring the stability of the solid wood floor. This structure greatly reduces the possibility of arch and cracking of the solid wood floor, ensuring the reliability and life of the use. Unique patented locking technology, to ensure that the floor joint of the seamless and super deformation resistance, so that the floor is not easy to crack in the joint under geothermal conditions, installation only two floors above and below the joint, you can accurately buckle, real close seam, to avoid dust accumulation and bacterial growth.
4, in the ground heating environment, three layers of solid wood flooring can be renovated.
Floor heating paving process
The first step: Clean the ground: pay attention to clean the corner flat, ensure that enough expansion joints.
Step 2: Lay a layer of plastic sheet on the ground to isolate moisture, so that the plastic sheet is 10cm higher than the ground at the four corners.
Step 3: Laying the floor mat: pay attention not to overlap, the interface must be sealed with tape, and around the wall 5cm.
Step 4: Pave the floor.
1. When installing the floor, the moisture content of the cement floor should not exceed 10%;
2, before laying the floor, the heating system should be turned on for at least two weeks, and it is 2/3 of the maximum heat output, so that all remaining moisture evaporates out;
3, three to four days before the floor installation, the heating system is reduced to the appropriate installation temperature (about 20±2 degrees in the room);
4, geothermal system heating must be uniform temperature, avoid some surface temperature is too high, try to keep the surface constant temperature,
5, the room surface need to have geothermal heating, and must use standard functional components, the floor heating ground temperature is not allowed to exceed 27 ° C.
6, the heating system meets the basic heating conditions: closed, insulated and other geothermal heating system on the ground, it is strictly prohibited to pick nails on the ground, holes and other measures.
Step 5: Accessories: To use a thicker baseboard than the ordinary floor, and need to be independently constructed.
Step 6: Geothermal test: The floor can only be heated 24 hours after installation.
How to properly enjoy the floor heating
1, the first use of the geothermal system every year, to gradually warm up, with a daily increase of not more than 3℃-5℃ is appropriate. Geothermal system in the winter heating floor surface temperature is not allowed to exceed 27 degrees, otherwise high temperature baking will accelerate the loss of water in the floor, easy to lead to cracking of the floor.
2, the floor heating floor is also very afraid of drying. As the weather gets colder and colder, the flow of dry outdoor air into the room will increase the dryness and accelerate the deformation of the floor. At this time, it is necessary to increase the relative humidity of the room, place a humidifier in the room, or use a semi-dry mop to mop the floor every day to moisturize. The indoor relative humidity reaches 40% to 60%, which can effectively avoid the cracking of the floor table.
3, winter heating season did not stay, it is recommended to turn off or turn down the heating, at least once a week to open the window ventilation and semi-dry mop mop the floor care.
4, under the heating environment, avoid the use of furniture, carpet and floor directly cover a large area, will make the floor here due to the heat can not be dispersed, too concentrated and lead to uneven heating of the floor, resulting in deformation of the floor here, waste of heat.
The sharing of the floor heating and the floor is here, Xiaoxiang students friendly tips: because you buy solid wood flooring, please be sure to respect the natural properties of wood, please believe that the floor is the continuation of tree life, it needs timely ventilation, reasonable lighting and suitable environment! In daily use, please use and care for it reasonably to ensure the beautiful appearance and excellent performance of the floor.
