March 25, 2024
The correct process of waxing wood floor and precautions
1, during the construction period, try to choose sunny day waxing, rainy day humidity is too high, waxing will produce white turbidity phenomenon. When the room temperature is below 5 degrees, the floor wax will harden.
2, need to use a clean cloth to wipe the ground before waxing, if the use of chemicals containing rags to wipe the floor, will lead to poor adhesion of the floor wax.
2
Waxing process:
Clean:
1. Remove dirt on the floor surface.
2. Wipe the stains on the floor with diluted neutral detergent.
3. Wipe with a wet cloth that is forcefully wrung out.
Full drying:
1, the floor surface and groove of the moisture completely dry before waxing. The time required varies depending on the season, but it usually takes more than half a day.
2, if not fully dried, the floor wax will not be closely attached to the floor surface, affecting the appearance of white phenomenon.
Waxing:
1, shake the container with floor wax, and fully stir evenly;
2, before the overall waxing of the floor of the room, it is necessary to carry out a local trial in the corner of the room and other inconspicuous places to confirm whether there is any abnormality.
3, fully dip the floor wax with a clean rag, with no dripping is appropriate;
4, according to the direction of the wood grain of the floor carefully daub, do not miss coating or uneven thickness.
5, to maintain the thickness is the key to waxing.
3
Number of waxes:
1. Waxing is not the more the better
2, the general operation mode is: twice. Once the bottom wax, once the surface wax can be polished.
